Decided that a headboard was in order, and that I'd make my own design/measurements**. So I got a piece of birch cut at Lowes, stained it-just one layer seemed to be fine since I didn't really want to deal with cleaning another brush, and it took to the wood well enough to keep going.
Used the clamps I originally bought for the pedals on the racing game seat to lock the "frame" into place with glue and then screw in at the corners after sanding everything in sight down. Note brilliant use of blanket to catch said sanding debris. Also note that blankets were not used in previous sanding efforts.
**look for future blog posts about "head board problems//head board falling off"
No comments:
Post a Comment